MC10E157FNR2G Overview

As a means of saving space, digital switch is provided in the 28-LCC (J-Lead).In this case, it is packaged as Tape & Reel (TR).Mounting is performed using Surface Mount.As the analog part, the circuit uses an analog IC Multiplexer.By maintaining the operating temperature at 0°C~85°C, turn signal switch will not be affected by external factors.The turn signal switch is designed for use with a ±4.2V~5.7V supply voltage, which gives it a lot of flexibility.With the 10E series, the multiplexers are suitable for a diverse range of applications.There is a design for terminating 28 as part of its basic configuration.In this case, 5V is the voltage supplied to the multiplexer's system.In this turn signal switch, there are 28 components that can be connected to each pin.As a result, conductors end at J BEND.The logic switch is a member of the 10E family.To avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.7V.As a result, the turn signal switch consists of 1 outputs.In this multiplexer, there is a total of 2 inputs.

MC10E157FNR2G Features

Supplied in the 28-LCC (J-Lead) package

MC10E157FNR2G Applications

There are a lot of Rochester Electronics, LLC MC10E157FNR2G Signal Switches / Multiplexers / Decoders applications.

• Seven segment displays
• Enabling different rows of memory depending on address in memory chips
• Enabling different functions units in microprocessor instruction decoding
• Solenoid cooling fan
• Electronic circuits
• Code conversion
• Electronics industry
• Frequency multiplexing system
• Data bus control
• Make half adder