MC10E158FN Overview

The reason it is provided is that the board space can be saved by placing digital switch in the 28-LCC (J-Lead).Tube represents its packaging.As far as mounting is concerned, digital switch ic uses Surface Mount.As the analog part, the circuit uses an analog IC Multiplexer.By maintaining the operating temperature at 0°C~85°C, turn signal switch will not be affected by external factors.Designers have greater flexibility when digital controlled switch operates at a ±4.2V~5.7V supply voltage.With the 10E series, the multiplexers are suitable for a diverse range of applications.There are 28 terminations included in its basic configuration.The multiplexer is supplied with 5V voltage.A component pin count of 28 can be found on this turn signal switch.Using the point J BEND as an end point of conductors, it is used to determine the terminus of a conductor.I would like to refer to the logic switch as a member of the 10E family.The minimal supply voltage (Vsup) should be kept at 4.2V to avoid some unnecessary failures.In order to avoid unnecessary failures, the maximum supply voltage (Vsup) should be kept at 5.7V.The turn signal switch has 1 outputs.A multiplexer such as this has 2 inputs available.In addition, NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V exhibits improved characteristics.

MC10E158FN Features

Supplied in the 28-LCC (J-Lead) package
NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V

MC10E158FN Applications

There are a lot of Rochester Electronics, LLC MC10E158FN Signal Switches / Multiplexers / Decoders applications.

• Make full adder
• Code conversion
• Electronics industry
• Video transmission
• Signal router
• Metal detectors
• Relay
• VGA
• Enabling block of memory depending on address in memory chips
• RF-based home automation system