NB100LVEP56DTR2G Overview

In order to save board space, digital switch is located in the 20-TSSOP (0.173, 4.40mm Width).As a result, it is packaged in the way of Tape & Reel (TR).The method digital switch ic adopts for mounting is Surface Mount.Differential Digital Multiplexer is the analog IC that the multiplexers uses.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.A supply voltage of ±2.375V~3.8V provides digital controlled switch's superior flexibility for designers.Multiplexers of the 100LVEP series can be used in a wide range of applications.As parts of its basic configuration, 20 terminations are desgined.The voltage supplied for multiplexer's system is 2.5V.multiplexer's systemA component pin count of 20 is found on this turn signal switch.At the end of a conductor, it uses GULL WING as the point where the conductor ends.Keep Vsup at 2.375V to avoid unnecessary failures.Keeping Vsup at 5.5V will prevent some unnecessary failures.The turn signal switch operates with 1 outputs.In this multiplexer, there is a total of 2 inputs.In addition, NECL MODE: VCC = 0V WITH VEE = -2.375V TO -5.5V provides improved characteristics.

NB100LVEP56DTR2G Features

Supplied in the 20-TSSOP (0.173, 4.40mm Width) package
NECL MODE: VCC = 0V WITH VEE = -2.375V TO -5.5V

NB100LVEP56DTR2G Applications

There are a lot of Rochester Electronics, LLC NB100LVEP56DTR2G Signal Switches / Multiplexers / Decoders applications.

• Frequency multiplexing system
• Implementing boolean functions with multiple variables
• Recording transmission
• Signal router
• Logic gates for other digital devices
• Memory system of computers
• Microprocessor instruction decoding
• Code conversion
• Idle motor
• HDMI applications