NB2305AI1DG Overview

As a clock IC, PLLs is packaged using the Tube method. The 8-SOIC (0.154, 3.90mm Width) package embeds this Clock PLL. This clock generator ic can sustain a maximum temperature of 260 during reflowing. It contains a total of 8 terminations within RF synthesizer. This time clock generator should be voltaged at 3.3V. As the Clock PLL's input, CMOS is designed to be used in order to generate the clock signal. A total of 1 circuits are implemented to access the full performance of the electrical part. An up to 133MHz frequency is provided by this clock-based RF synthesizer. Thanks to the Surface Mount, this electric component can easily be installed on a panel. It would be possible to supply this clock PLL with 3.6V of power. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 3V. There are 3V~3.6V different supply voltages that can be provided for this RF synthesizer. Using the test statistics, we estimate that the ambient temperature should be -40°C~85°C. Zero Delay Buffer is the type of electrical part that this component is classified as. In particular, this clock PLL is designed to be used with microprocessors. At 0.25 ns Max, this analog clock generator exhibits low timing skew. There are 4 pins that are configured to enable high true output on this analog clock generator. The 2305 family of parts can be used to find electronic parts that are similar to each other.

NB2305AI1DG Features

Available in the 8-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
4 true outputs

NB2305AI1DG Applications

There are a lot of Rochester Electronics, LLC NB2305AI1DG Clock Generators applications.

• Automatic control
• Electronic equipment
• Clock recovery
• Coherent carrier tracking
• Pagers
• PMR (Professional Mobile Radio)
• Jitter reduction
• Digital switching systems
• Wireless handsets
• Local oscillator source in receiver