NC7SP158P6X Overview

The reason it is provided is that the board space can be saved by placing digital switch in the 6-TSSOP, SC-88, SOT-363.The package is packaged in accordance with Tape & Reel (TR).Surface Mount is the mounting method digital switch ic uses.The multiplexers uses an analog IC Multiplexer as the analog part of the circuit.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.Using a 0.9V~3.6V supply voltage provides digital controlled switch's superior flexibility for designers.In addition to being a member of the 7SP series, these multiplexers have a wide range of applications.As part of its basic configuration, 6 terminations are designed as a part of it.The voltage supplied for multiplexer's system is 1.2V.multiplexer's systemThis turn signal switch contains 6 component pins.As the end of conductors, it uses GULL WING.The logic switch object belongs to the family of P.Keeping Vsup at 0.9V will prevent some unwanted failures.Avoid unnecessary failures by keeping Vsup at 3.6V.As part of the operation of this turn signal switch, there are 1 outputs.The multiplexer is equipped with 2 inputs.

NC7SP158P6X Features

Supplied in the 6-TSSOP, SC-88, SOT-363 package

NC7SP158P6X Applications

There are a lot of Rochester Electronics, LLC NC7SP158P6X Signal Switches / Multiplexers / Decoders applications.

• Steel plants
• Frequency multiplexing system
• Seven segment displays
• Relay
• Enabling block of memory depending on address in memory chips
• Make half adder
• Data demultiplexing
• Code converters
• Injectors
• Microprocessor memory systems