SN74AC564DWR Overview

The flip flop is packaged in a case of 20-SOIC (0.295, 7.50mm Width). As part of the package Tape & Reel (TR), it is embedded. T flip flop uses Tri-State, Invertedas the output. It is configured with the trigger Positive Edge. Surface Mountis positioned in the way of this electronic part. It operates with a supply voltage of 2V~6V. It is at -40°C~85°C TAdegrees Celsius that the system is operating. It is an electronic flip flop with the type D-Type. FPGAs belonging to the 74ACseries contain this type of chip. A frequency of 95MHzshould be the maximum output frequency. In total, there are 1 elements. This process consumes 4μA quiescents. It has been determined that there have been 20 terminations. The D flip flop is powered by a voltage of 3.3V . There is 4.5pF input capacitance for this T flip flop. This D flip flop belongs to the family of AC. There is a 6Vmaximum supply voltage (Vsup). A normal operating voltage (Vsup) should remain above 2V. This D flip flop is equipped with 0 ports. BROADSIDE VERSION OF 534is also one of its characteristics.

SN74AC564DWR Features

Tape & Reel (TR) package
74AC series

SN74AC564DWR Applications

There are a lot of Rochester Electronics, LLC SN74AC564DWR Flip Flops applications.

• Count Modes
• ESCC
• Divide a clock signal by 2 or 4
• Computers
• Pattern generators
• Set-reset capability
• Digital electronics systems
• Asynchronous counter
• Differential Individual
• Data storage