SN74ALVCH162721DL Overview

The item is packaged in 56-BSSOP (0.295, 7.50mm Width)cases. You can find it in the Tubepackage. T flip flop uses Tri-State, Non-Invertedas its output configuration. JK flip flop uses Positive Edgeas the trigger. The electronic part is mounted in the way of Surface Mount. A 1.65V~3.6Vsupply voltage is required for it to operate. The operating temperature is -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. In FPGA terms, D flip flop is a type of 74ALVCHseries FPGA. In order for it to function properly, its output frequency should not exceed 150MHz. A total of 1elements are contained within it. It consumes 40μA of quiescent current without being affected by external factors. There have been 56 terminations. It is powered by a voltage of 1.8V . This T flip flop has a capacitance of 3.5pF farads at the input. It is a member of the ALVC/VCX/Afamily of D flip flop. As soon as 3.6Vis reached, Vsup reaches its maximum value. There are 2 ports embedded in the flip flops.

SN74ALVCH162721DL Features

Tube package
74ALVCH series

SN74ALVCH162721DL Applications

There are a lot of Rochester Electronics, LLC SN74ALVCH162721DL Flip Flops applications.

• Modulo – n – counter
• Test & Measurement
• QML qualified product
• Data storage
• High Performance Logic for test systems
• Instrumentation
• Convert a momentary switch to a toggle switch
• Bounce elimination switch
• Buffer registers
• Storage registers