SN74CBTLVR16292LR Overview

In order to save board space, digital switch is located in the 56-BSSOP (0.295, 7.50mm Width).As a result, it is packaged in a way that is referred to as Tape & Reel (TR).In terms of mounting, digital switch ic uses the method of Surface Mount.the multiplexers uses IC Multiplexer/Demultiplexer as the analog IC.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.When digital controlled switch operates at 2.3V~3.6V, designers have superior flexibility.Multiplexers of the 74CBTLVR series can be used in a wide range of applications.This configuration includes 56 terminations as part of its basic functionality.The multiplexer's system is supplied with a voltage of 2.5V.This turn signal switch contains 56 component pins.At the end of a conductor, it uses GULL WING as the point where the conductor ends.In the CBTLV/3B family, the logic switch is included.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 2.3V.In order to avoid some unnecessary failures, you should maintain a maximum supply voltage (Vsup) of 3.6V.As a result, the turn signal switch consists of 2 outputs.The multiplexer is equipped with 1 inputs.

SN74CBTLVR16292LR Features

Supplied in the 56-BSSOP (0.295, 7.50mm Width) package

SN74CBTLVR16292LR Applications

There are a lot of Rochester Electronics, LLC SN74CBTLVR16292LR Signal Switches / Multiplexers / Decoders applications.

• High-performance memory systems
• Frequency multiplexing system
• Analog to digital conversion
• Recording transmission
• Electronically controlled engine system
• LVDS
• Data bus control
• A/D converters
• Time division multiplexing system
• Data transfer