BD3486FS-E2 Overview

Additionally, there is a case included with the book as well. The mounting type recommended by the manufacturer is Surface Mount. A SSOP case contains it. A 4 channel is present on the device. It has 32 terminations. A search for parts belonging to the BD3486 family will yield similar results. An accessible 32 pin can be found on the chip. You can use TONE CONTROL CIRCUIT to sort consumer ICs on a part. In order to operate this part, the minimum supply voltage (Vsup) must not be less than 7V volts. This part of the family is called the Other Consumer ICs family. A voltage of 8.5V volts can be given by it. Vsup reaches its maximum (9.5V). The mount is made by Surface Mount. 3 bands can be seen on it. The method should be used when the temperature is below 85°C. During operation, the chip should not be operated below -40°C degrees Celsius. Several pins on the chip are 32-shaped. Upon reaching 1.5A, its maximum output current is reached.

BD3486FS-E2 Features

With SSOP channels
consumer IC type: TONE CONTROL CIRCUIT

BD3486FS-E2 Applications

There are a lot of ROHM Semiconductor
BD3486FS-E2 Audio Special Purpose applications.

• Digital Television
• Musical Instruments
• Recording Systems
• High-End Audio/Sound Card for PC
• Replacement of DIR1703
• Other Applications Requiring S/PDIF Receiver
• Audio Differential Line Drivers
• Audio Mix Consoles
• Distribution Amplifiers
• Graphic and P arametric Equalizers