BD37522FS-E2 Overview
The book is also accompanied by a case, which only adds to the value of the book. As a mounting type, Surface Mount is recommended for it. A 24-SOP (0.213, 5.40mm Width) case has been embedded with it. I have a device with 4 channels attached to it. In this part, you will find Audio Tone Processor functions that you may find useful. In addition to being used in Automotive Audio, Consumer Audio, the device can be used in Y as well. Votage is supplied within the specified time frame. -40°C~85°C TA is the range of temperature for this device. This chip has 24 terminations, which means it has 24 terminations on it. The BD37522 family of parts can be found by searching for a part number that is similar to it. As far as the 24 pins on the chip are concerned, they are accessible. It is possible to sort the consumer IC type of a part using CONSUMER CIRCUIT. It is important that the minimum supply voltage (Vsup) for this part is greater than 7V. In this part, we have the Audio Control ICs family. Max supply voltage (Vsup) reaches 9.5V. In order to mount it, Surface Mount is required. If the voltage gain is to stay at 0 dB, it should be set to 0 dB. As a result, it works with a supply voltage of 38mA. Depending on the supply type, it can be categorized by Single. There is a maximum output current of 500mA for this device to meet the operational requirements.
BD37522FS-E2 Features
With 24-SOP (0.213, 5.40mm Width) channels
operate temperature at the range of -40°C~85°C TA
consumer IC type: CONSUMER CIRCUIT
operate supply current at 38mA
supply type: Single
BD37522FS-E2 Applications
There are a lot of ROHM Semiconductor
BD37522FS-E2 Audio Special Purpose applications.
- Replacement of DIR1703
-
- Other Applications Requiring S/PDIF Receiver
-
- Audio Differential Line Drivers
-
- Audio Mix Consoles
-
- Distribution Amplifiers
-
- Graphic and P arametric Equalizers
-
- Dynamic Range Processors
-
- Digital Effects Processors
-
- Telecom Systems
-
- Hi-Fi Equipment
-
