BD45372G-TR Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. This power ic is packaged in a way that looks like a Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. It is possible to find on this power management a series of 1 channels. For your reference, this PMIC includes a list of SC-74A, SOT-753 functions. There are many benefits that this IC power shares with other Voltage Detector products as well. During operation, the power ic is supplied with a voltage of 5.7V. Power management conducts at a voltage of 1. Power management is included in the Surface Mount mount. A IC power such as this can be classified as a Power Management Circuits power management system. In total, IC powers are 5 pins on the board. Pin count of the power management is 5. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 950mV. The maximum supply voltage (Vsup) is not to exceed 9.5V volts in this IC management. Mounting type Surface Mount is recommended. We recommend setting the supervisors to -40°C~105°C TA degrees. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. A similar IC managements number of the manufacturer can always be found by using BD45, the base power ics number. A maximum supply temperature of 3μA can be used. The IC power comes from the well-known BD45xxx series.

BD45372G-TR Features

Voltage Detector type
Minimum supply voltage of 950mV

BD45372G-TR Applications

There are a lot of ROHM Semiconductor BD45372G-TR Voltage Supervisors applications.

• Detection of phase imbalance
• Utility meter
• Power distribution systems of infant care room
• Smart meter
• Kitchen appliances
• Precision measurement
• Important electronics for automotive protection
• Automotive permanent magnet synchronous motors
• Unattended substation automation
• Efficient information transmission