BD45481G-TR Overview

This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. There is a Tape & Reel (TR)-packaging method applied to IC management. In this PMIC, you can find 1 functions for your reference. On this supervisor, there is a series of 1 channels that can be found. In this PMIC, you can find SC-74A, SOT-753 functions for your reference. Compared to other Voltage Detector products, this PMIC has a lot of benefits to offer. The supervisor is always powered by a 6.8V volt supply. Power management conducts at a voltage of 1. Surface Mount is the one that mounts power management. It is possible to subcategorize this power ic as a Power Management Circuits chip. Power management has a total of 5 pins. The pins of the power management system count 5. There should be a minimum voltage supply (Vsup) of 950mV for this PMIC. During this IC power, the maximum supply voltage (Vsup) should not exceed 9.5V volts. Surface Mount is the recommended mounting type. This range of temperature should be set for the supervisors: -40°C~105°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. A similar IC managements number of the manufacturer can always be found by using BD45, the base power ics number. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 3.15μA. The IC power that you are looking at comes from our well-known BD45xxx series product line.

BD45481G-TR Features

Voltage Detector type
Minimum supply voltage of 950mV

BD45481G-TR Applications

There are a lot of ROHM Semiconductor BD45481G-TR Voltage Supervisors applications.

• Power distribution systems of ICU
• Military communications
• Dash board
• Battery cars
• Network equipment
• Important electronics for automotive safety
• Radio
• Automotive permanent magnet synchronous motors
• Linux and server computing
• Satellite navigation