BD46255G-TR Overview

It is mounted through 5 terminals on the power management. Packaging is in the form of a Tape & Reel (TR). In this PMIC, you can find 1 functions for your reference. There are 1 channels on this power managment ic that can be found in a series. For your reference, this PMIC includes a list of SC-74A, SOT-753 functions. There are a number of benefits that this PMIC has in common with other Voltage Detector manage ics. During operation, the power ic is supplied with a voltage of 4.5V. When 1 is applied to the power ic, it conducts. Power management is included in the Surface Mount mount. The power management system can be categorized as a Power Management Circuits chip. Taking into account all of the pins, this power management has a total of 5. There are 5 pins on the power managment ic. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 950mV. There should be no more than 9.5V volts of maximum supply voltage (Vsup) in this power management. The recommended mounting type for IC management is Surface Mount. The supervisors should be set to the following temperature: -40°C~105°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. It is always advisable to use BD46, the base supervisor number, when searching for similar PMICs from the manufacturer. At the most, voltage supervisor can work with a supply temperature of 2.85μA. A PMIC from the well-known BD46xxx series of products is being offered here.

BD46255G-TR Features

Voltage Detector type
Minimum supply voltage of 950mV

BD46255G-TR Applications

There are a lot of ROHM Semiconductor BD46255G-TR Voltage Supervisors applications.

• Low voltage/high power - AI, GPU
• Electrical fire monitoring system
• Digitally controlled LDO regulators circuit
• Unattended substation automation
• Utility meter
• Military electronics
• Detection of phase sequence
• Important electronics for automotive safety
• Detection of phase imbalance
• emergency room