BD46322G-TR Overview

There are 5 terminals connected to this power management, which makes it easy to mount. It is packaged with Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. There are 1 channels on this power managment ic that can be found in a series. For your reference, this PMIC includes a list of SC-74A, SOT-753 functions. There are a lot of similarities between this IC management and other Voltage Detector products. The supervisor is always powered by a 5.2V volt supply. During operation, the power ic is supplied with a voltage of 1. The power management is mounted by Surface Mount. The power management system can be categorized as a Power Management Circuits chip. Taking into account all of the pins, this power management has a total of 5. Power managment ic pin count is 5. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 950mV volts. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 10V volts. Surface Mount mounting is recommended. This range of temperature should be set for the supervisors: -40°C~105°C TA. Power management has an output of Push-Pull, Totem Pole during operation. There is a supply current of 850nA for the power management. It is always advisable to use BD46, the base supervisor number, when searching for similar PMICs from the manufacturer. The maximum supply temperature is 3μA. As you can see, this IC power comes from the well-known BD46xxx series of products.

BD46322G-TR Features

Voltage Detector type
Minimum supply voltage of 950mV
850nA operating supply current

BD46322G-TR Applications

There are a lot of ROHM Semiconductor BD46322G-TR Voltage Supervisors applications.

• Network equipment
• Solar power charger
• Radar
• Dash board
• Low voltage/high power - AI, GPU
• Power distribution systems of CCU
• Power distribution systems of operating room
• Battery-powered equipment
• Urban rail transit weak current power monitoring
• Refrigeration