BD48K25G-TL Overview

There are 3 terminals on this power management that allow it to be mounted. There is a Tape & Reel (TR)-packaging method applied to IC management. The purpose of this IC management is to provide you with a reference of 1 functions. A series of 1 channels can be found on this supervisor. In this PMIC, you can find TO-236-3, SC-59, SOT-23-3 functions for your reference. There are a number of benefits that this PMIC has in common with other Voltage Detector manage ics. There is a specification for the peak reflow temperature of the package to be 260. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Surface Mount mounts power management on the wall. 3 pins make up the power management. Supply voltage (Vsup) should be at least 2.3V for this power management. There should be no more than 6V volts of supply voltage (Vsup) in this power management. The mounting type of the supervisors is Surface MountIt is recommended to set the supervisor's temperature to this range: -40°C~105°C TA. During operation, this power management system outputs Open Drain or Open Collector. For this power management, there is an 900nA volt supply current. You can always use BD48, the base supervisor number, to search for similar PMICs of the manufacturer. It is one of the well-known BD48Kxx series power ic line.

BD48K25G-TL Features

Voltage Detector type
Minimum supply voltage of 2.3V
900nA operating supply current

BD48K25G-TL Applications

There are a lot of ROHM Semiconductor BD48K25G-TL Voltage Supervisors applications.

• Leakage current detection
• Consumer electronics
• DVR
• Electric heating appliances
• Analog circuit
• Fire equipment power monitoring system
• Medical-specific insulation monitor
• Battery-powered equipment
• Multi-voltage system
• Important electronics for automotive safety