BD48L33G-TL Overview

There are 3 terminals on this power management that allow it to be mounted. Tape & Reel (TR)-packaging is used. Power management is possible to find a series of 1 functions. On this supervisor, there is a series of 1 channels that can be found. There are TO-236-3, SC-59, SOT-23-3 functions included in this PMIC so that you can refer to them. There are a lot of similarities between this IC power and other Voltage Detector products. IC management conducts in a 1-voltage supply. By Surface Mount, IC management has been mounted. Pin count of the power management is 3. There should be a minimum voltage supply (Vsup) of -300mV for this PMIC. This IC power should be powered by no more than 10V volts of supply voltage (Vsup). Surface Mount is the recommended mounting type. You should set the supervisor's temperature during -40°C~105°C TA . As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. As you may know, this PMIC comes from the well-known BD48Lxx series product line.

BD48L33G-TL Features

Voltage Detector type
Minimum supply voltage of -300mV

BD48L33G-TL Applications

There are a lot of ROHM Semiconductor BD48L33G-TL Voltage Supervisors applications.

• Low voltage/high power - AI, GPU
• Medical-specific isolation transformer
• Satellite navigation
• Power distribution systems of infant care room
• Detection of phase sequence
• Smartphones
• Consumer electronics
• Urban rail transit weak current power monitoring
• FPGA design
• Digitally controlled LDO regulators circuit