BD4924G-TR Overview

Packaged in the form of a Tape & Reel (TR), power management is easy to use. In this PMIC, you can find SC-74A, SOT-753 functions for your reference. As with other Voltage Detector products, this IC management also offers a wide range of benefits. When a supply voltage of 1 is applied to the power ic, it conducts. The mount is provided by Surface Mount. A total of 5 pins are located on this power management. Power managment ic pin count is 5. It is recommended that Vsup should not be less than -300mV for this IC power. There should be no more than 10V volts of maximum supply voltage (Vsup) in this power management. The recommended mounting type is Surface Mount. The supervisors should be set to the following temperature: -40°C~105°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. For this power management, there is an 900nA volt supply current. It is always advisable to use BD49, the base supervisor number, when searching for similar PMICs from the manufacturer. A maximum supply temperature of 1.53μA can be used with this power management. The PMIC is a kind of the well-known BD49xxx series of products.

BD4924G-TR Features

Voltage Detector type
Minimum supply voltage of -300mV
900nA operating supply current

BD4924G-TR Applications

There are a lot of ROHM Semiconductor BD4924G-TR Voltage Supervisors applications.

• Power distribution systems of ICU
• Solar power charger
• Leakage current detection
• Stable power system
• Radar
• Battery cars
• Refrigeration
• Medical-specific insulation monitor
• Power communication system
• Power distribution systems of operating room