BD49K33G-TL Overview

As you can see, this power management is mounted through 3 terminals. This power ic is packaged in a way that looks like a Cut Tape (CT). The purpose of this IC management is to provide you with a reference of 1 functions. A series of 1 channels can be found on this supervisor. In this IC management you will find TO-236-3, SC-59, SOT-23-3 functions for you to refer to. Compared to other Voltage Detector products, this PMIC has a lot of benefits to offer. During operation, the power ic is supplied with a voltage of 1. The power management is mounted by a Surface Mount-axis. There are 3 pins on the supervisor. Supply voltage (Vsup) should be at least -300mV for this power management. The maximum supply voltage (Vsup) in this PMIC should not exceed 10V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. We recommend setting the supervisors to -40°C~105°C TA degrees. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. Supervisors from the well-known BD49Kxx series product line are featured in this PMIC.

BD49K33G-TL Features

Voltage Detector type
Minimum supply voltage of -300mV

BD49K33G-TL Applications

There are a lot of ROHM Semiconductor BD49K33G-TL Voltage Supervisors applications.

• Low voltage/high power - AI, GPU
• Radar
• Precision measurement
• Medical-specific insulation monitor
• Leakage protection
• Utility meter
• Refrigeration
• Medical-specific isolation transformer
• Detection of phase imbalance
• External alarm