BD5323G-TR Overview

As you can see, this power management is mounted through 5 terminals. Packaged in the form of a Tape & Reel (TR), power management is easy to use. As a reference, this IC management includes 1 functions for your convenience. On this supervisor, there is a series of 1 channels that can be found. For your reference, this PMIC includes a list of SC-74A, SOT-753 functions. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. There is a voltage supply of 1.2V for the PMIC chip, and the chip conducts at that voltage. When 1 is applied to the power ic, it conducts. Surface Mount mounts power management on the wall. In total, IC powers are 5 pins on the board. Pin count of the power management is 5. It is recommended that Vsup should not be less than 950mV for this IC power. There should be no more than 10V volts of maximum supply voltage (Vsup) in this power management. In this case, Surface Mount is the recommended mounting type. This range of temperature should be set for the supervisors: -40°C~105°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. There is a supply current of 950nA for the power management. A similar IC managements number of the manufacturer can always be found by using BD53, the base power ics number.

BD5323G-TR Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 950mV
950nA operating supply current

BD5323G-TR Applications

There are a lot of ROHM Semiconductor BD5323G-TR Voltage Supervisors applications.

• External alarm
• Radar
• Important electronics for automotive safety
• Low voltage/high power - AI, GPU
• Dash board
• Efficient information transmission
• Magnetic resonance imaging
• Embedded computing
• Consumer electronics
• Medical-specific isolation transformer