BD5345FVE-TR Overview

There are 5 terminals connected to this power management, which makes it easy to mount. Packaging is in the form of a Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. Power management consists of 1 channels, each of which can be used independently. There are SOT-665 functions included in this PMIC so that you can refer to them. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. During operation, the power ic is supplied with a voltage of 1.2V. When 1 is applied to the power ic, it conducts. Surface Mount mounts power management on the wall. The total number of pins on this power management is 5. 5 pins make up the power management. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.2V. In this PMIC, the maximum supply voltage (Vsup) should not exceed 10V volts. Surface Mount is the recommended mounting type. It is recommended that the supervisor be set to this temperature: -40°C~105°C TA. There is an output voltage of Push-Pull, Totem Pole from this supervisor when it is operating. There is a supply current of 950nA for the power management. You can always use BD53, the base supervisor number, to search for similar PMICs of the manufacturer.

BD5345FVE-TR Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
950nA operating supply current

BD5345FVE-TR Applications

There are a lot of ROHM Semiconductor BD5345FVE-TR Voltage Supervisors applications.

• Battery cars
• Power distribution systems of ICU
• Microprocessor system
• Battery cars
• Personal computers
• Transformer load monitoring equipment
• Digitally controlled LDO regulators circuit
• Electrical fire monitoring system
• Stable power system
• Power distribution systems of infant care room