BD5360G-TR Overview

Power management is mounted through 5 terminals. It is packaged with Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. It is possible to find on this power management a series of 1 channels. To assist you, this PMIC includes SC-74A, SOT-753 functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. There is a voltage supply of 1.2V for the PMIC chip, and the chip conducts at that voltage. When 1 is applied to the power ic, it conducts. Surface Mount mounts power management on the wall. A total of 5 pins are located on this power management. This power management has 5 pins. Supply voltage (Vsup) should be at least 1.2V for this power management. The maximum supply voltage (Vsup) in this PMIC should not exceed 10V volts. Power management' mounting is recommended to be done with the Surface Mount type of mounting. It is recommended to set the supervisor's temperature to this range: -40°C~105°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. Supplied with a operating current of 950nA, this PMIC is capable of fully function as specified. There are other features such as DETECTION THRESHOLD VOLTAGE IS 6.0V to name a few. A similar IC managements number of the manufacturer can always be found by using BD53, the base power ics number.

BD5360G-TR Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
950nA operating supply current

BD5360G-TR Applications

There are a lot of ROHM Semiconductor BD5360G-TR Voltage Supervisors applications.

• Detection of phase loss
• Detection of phase sequence
• Military electronics
• Linux and server computing
• Fire equipment power monitoring system
• Cloud computing
• Microprocessor system
• Important electronics for automotive protection
• emergency room
• Radio