BD6067GU-E2 Overview

There is also a 8-VFBGA, CSPBGA package that is used to save space on the board. For the design of these LED drivers, 1 outputs are used.Mounting is done according to the Surface Mount method.It is highly performing and reliable when it emerges as a DC DC Regulator.-30°C~85°C TA is the operating temperature and it works fine.As a result, Backlight, Camera Flash is likely to benefit greatly.In this LED driver, the base is configured as 8.The mount is on its way to Surface Mount.You can find this LED driver under the base part number BD606*.The voltage of 5.5V is acceptable.A voltage output of 30V is provided by this device.With 2.7V as the minimal input voltage, it operates.A minimal supply voltage of 2.7V is required for it to achieve the highest efficiency.It is possible to supply current up to 5.5V.The current that can be supplied to the load is 30mA.Having the switching frequency at 1MHz enables this electronic component to perform at its best.36V should be the maximum output voltage.

BD6067GU-E2 Features

Available in the 8-VFBGA, CSPBGA package
Operating temperature of -30°C~85°C TA
Switching frequency of 1MHz

BD6067GU-E2 Applications

There are a lot of ROHM Semiconductor BD6067GU-E2 LED Driver ICs applications.

• OLED power supply for portable equipment
• Stage Lighting and Signage
• Ultraviolet (UV) and Infrared (IR) Irradiation Devices
• Down lighting
• Panel lighting
• Constant Voltage Power Source for portable equipment
• A- lamps
• Portable lighting
• Architectural lighting
• Other Electronic Devices