BD6069GUT-E2 Overview

There is also a 8-WFBGA, CSPBGA package that is used to save space on the board. LED drivers design with 1 outputs.This mounting method is Surface Mount.Initially, it emerges as a DC DC Regulator with high efficiency and a high degree of reliability.-30°C~85°C TA is the operating temperature for the led light driver.It is clear that Backlight will benefit from the program.Frequency 1MHz is the basis of operation.The system operates with a termination of 0.A configuration of this chip is made up of 8 pins.There may be undetermined failures if the voltage supply falls below 2.7V.We estimate that there are 4 segments.It's mounted in Surface Mount.This LED driver can be found under the base part number BD606*.Its output voltage is 18V.Depending on its characteristics, it is classified into Switching Regulator or Controllers.A minimal supply current is required in order for this device to provide high efficiency.The internal voltages needed to power systems is 5.5V.

BD6069GUT-E2 Features

Available in the 8-WFBGA, CSPBGA package
Operating temperature of -30°C~85°C TA
Frequency of 1MHz
Operating with the supply voltage of 5.5V

BD6069GUT-E2 Applications

There are a lot of ROHM Semiconductor BD6069GUT-E2 LED Driver ICs applications.

• Sports Facility Lighting
• Linear fluorescent
• Flicker-free LED Lighting using R1580N
• Portable lighting
• Panel lighting
• Ultraviolet (UV) and Infrared (IR) Irradiation Devices
• White LED Backlight for portable equipment
• LED Lightings for Inspection Devices
• Scanners and Handy Terminals
• Constant Voltage Power Source for portable equipment