48 Terminals 4.5V~30V 48-Pin BD901* DC to DC converter ICDUAL SWITCHING CONTROLLER 2 Outputs 250kHz~1.2MHz Transistor Driver
SOT-23
BD9012KV-E2 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mounting Type
Surface Mount
Package / Case
48-LQFP
Surface Mount
YES
Number of Pins
48
Operating Temperature
-40°C~105°C TA
Packaging
Tape & Reel (TR)
Published
2008
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
48
ECCN Code
EAR99
Subcategory
Switching Regulator or Controllers
Terminal Position
QUAD
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
NOT SPECIFIED
Terminal Pitch
0.5mm
[email protected] Reflow Temperature-Max (s)
NOT SPECIFIED
Base Part Number
BD901*
Function
Step-Down
Number of Outputs
2
Qualification Status
Not Qualified
Output Voltage
5V
Output Type
Transistor Driver
Input Voltage-Nom
12V
Analog IC - Other Type
DUAL SWITCHING CONTROLLER
Output Configuration
Positive
Voltage - Supply (Vcc/Vdd)
4.5V~30V
Control Features
Enable, Frequency Control, Soft Start
Topology
Buck
Control Mode
VOLTAGE-MODE
Frequency - Switching
250kHz~1.2MHz
Input Voltage (Max)
30V
Control Technique
PULSE WIDTH MODULATION
Synchronous Rectifier
Yes
Switcher Configuration
PUSH-PULL
Max Frequency
1.2MHz
Height Seated (Max)
1.6mm
Length
7mm
Width
7mm
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
BD9012KV-E2 Product Details
BD9012KV-E2 Overview
It comes in a 48-LQFP package, so switching controller can be used for most applications. It is sufficient to generate 2 outputs with this dc motor controller. Tape & Reel (TR) solid enclosure protects the pmic. A total of Transistor Driver dc switching's outputs can be handled by it. This dc control has a supply voltage and operating voltage of 4.5V~30V. Suitable for work in a -40°C~105°C TA dc switcher. The switching controller is capable of switching at the 250kHz~1.2MHz position. dc dc regulators can be carried out with Surface Mount. For efficient switching control, the dcdc regulator features Enable, Frequency Control, Soft Start. An analog IC with the DUAL SWITCHING CONTROLLER signal is connected to the switch converters. The switching converters's terminals (s) are designed at QUAD. Various 48 terminations. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 12V. You can find other relevant dc to dc converter ics by searching "BD901*". There are a total of 48 pins on switching converter. Switching converter is a type of Switching Regulator or Controllers in particular. A 5V voltage of DC regulator was detected in the test statistics. Voltages 30V are the maximum that the dc to dc regulator will accept. DC regulator has a maximum frequency of 1.2MHz.