BH6942KN-E2 Overview

20-VFQFN saves board space. Typically, LED drivers have 5 outputs.The led driver mounting is done by using Surface Mount.In this case, the DC DC Regulator emerges as highly efficient and reliable.If the led driver ic is set to -30°C~80°C TA, it will work normally.The system operates on the basis of the frequency 1.2MHz.In this case, there are 20 terminations.A configuration of this chip is made up of 20 pins.It is inevitable that there will be undetermined failures when the supply voltage is less than 2.8V.Segments counted are 5.It's mounted by Surface Mount.LED drivers are found under the base part number BH6942.The device has 20 pins.A maximum voltage of 4.5V is optimized for use by this device.Moreover, it can be classified as Display Drivers due to its characteristics.It is necessary to use 3.3V voltage to power systems.

BH6942KN-E2 Features

Available in the 20-VFQFN package
Operating temperature of -30°C~80°C TA
Frequency of 1.2MHz
Supply voltage of 3.6V
Operating with the supply voltage of 3.3V

BH6942KN-E2 Applications

There are a lot of ROHM Semiconductor BH6942KN-E2 LED Driver ICs applications.

• Flicker-free LED Lighting using R1580N
• LED backlight driver for LCD displays for portable equipment
• OLED power supply for portable equipment
• LED Lightings for Inspection Devices
• Replacement lamps
• Scanners and Handy Terminals
• General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
• Constant Voltage Power Source for portable equipment
• Portable lighting
• Down lights