BU2630F-E2 Overview

As a clock IC, it is packaged by the Tape & Reel (TR) method. There is a clock generator embedded in the 16-SOIC (0.173, 4.40mm Width) package. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. 16 terminations can be found in frequency generators. For this clock generator ic, a voltage of 2.5V is required. As the Clock PLL's input, Crystal is designed to be used in order to generate the clock signal. For a full understanding of the electronic part's performance, 1 circuits are implemented. It provides a maximum frequency of 80MHz. Surface Mount-slots make it easy to mount this electronic component on panels. 5.5V would be the maximum supply voltage for this clock generator. It is safe to use this frequency synthesizer with a supply voltage above 2.5V. There should be 2.5V~5.5V provided with this RF synthesizer. Based on the test statistics, an ambient temperature of -40°C~85°C should be set. Clock logic levels are supported by this RF synthesizer. It has been classified as a PLL Frequency Synthesizer electronic part, which means that it is a semiconductor. Microprocessors are specifically designed to use this clock-generating IC, which has a 16-bit output. It is possible to find its related electronic parts by searching for the base part number BU2630. PLL is designed with 16 pins. A PLL or Frequency Synthesis Circuits clock generator is essentially what this device is. The maximum supply current (Isup) should not be in excess of 3mA.

BU2630F-E2 Features

Available in the 16-SOIC (0.173, 4.40mm Width)
Supply voltage of 2.5V

BU2630F-E2 Applications

There are a lot of ROHM Semiconductor BU2630F-E2 Clock Generators applications.

• CB radios
• Wide area power system
• Ports
• PCI express cards
• Test and instrumentation equipment
• PMR (Professional Mobile Radio)
• Myriad digital applications
• Walkie-talkies
• Radar
• Frequency shifting decodes