In order to package it as a clock IC, the Tape & Reel (TR) package is used. Embedded in the 16-LSSOP (0.173, 4.40mm Width) package is this Clock PLL. Frequency generator is capable of operating at a maximum temperature of 260 when reflowing. There are 16 terminations found in the file. This electronic frequency generator requires a voltage of 3V. There is a Clock PLL called Crystal which is designed to be the input to this clock generator. 1 circuits are implemented to access the electronic component's full performance. Providing a maximum frequency of 80MHz, this clock-based RF synthesizer is suitable for a variety of applications. The Surface Mount allows this electrical component to be easily installed on the panel. There is a maximum voltage of 5.5V for this clock generator. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 2.5V. There are 2.5V~5.5V different supply voltages that can be provided for this RF synthesizer. Test statistics estimate a temperature of -40°C~85°C, which should be set as the ambient temperature. The RF synthesizer is compatible with Clock logic levels. Frequency Synthesizer is the type of electrical part that this component is classified as. An IC that generates clocks specifically for microprocessors, this clock PLL is 16-bits in si16e. As such, it is often referred to as a kind of PLL or Frequency Synthesis Circuits clock PLL. There should be no more than 3mA of supply current for this time clock generator.
BU2630FV Features
Available in the 16-LSSOP (0.173, 4.40mm Width) Supply voltage of 3V
BU2630FV Applications
There are a lot of ROHM Semiconductor BU2630FV Clock Generators applications.