BU4051BC Overview

Due to its 16-DIP (0.300, 7.62mm) packaging, the electronic part is convenient for international shipping. High reliability is provided by advanced packaging method Tube. Through Hole is where this multiplexer is located. 8:1 is the number of circuits in the multiplexer and demultiplexer. Operation at a temperature around -40°C~85°C TA. 16 terminations have been made so far. A high-quality output is provided by the electrical component's 8 channels. When the electronic component is given a voltage of 5V, it should be turned on and run. Into the electrical component body are injected 16 pins. This multiplexer is composed of 1 circuits. Use BU4051 to search for variants of the digital switches. There is 160Ohm internal resistance in this digital multiplexer. You can find the functions of the 16 pins in the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. A voltage higher than 18V should not normally be supplied to the switches. Analogue multiplexers of the Single supply type that are cost-effective. 3V is the lowest voltage the electrical component should receive. 15μA current would be enough for this multiplexer to operate. An analogue multiplexer drains from a single voltage supply at 3V~18V. For this switch, a dual supply voltage is feasible, but it must not exceed 9VIf you are using dual power supplies, you should attach at least 1.5V. 20MHz bandwidths enable data to be transferred.

BU4051BC Features

8 Channels
15μA Supply Current
Bandwidth: 20MHz

BU4051BC Applications

There are a lot of ROHM Semiconductor BU4051BC Analog Switches & Multiplexers ICs applications.

• Industrial control systems
• Automatic test equipment
• Cross Connects
• Multiplexers
• Channelized and Unchannelized DS3 applications
• Transmit
• Data switching
• SDH
• Low-Voltage
• High-Voltage