BU4214G-TR Overview

There are 5 terminals on this power management that allow it to be mounted. This power ic is packaged in a way that looks like a Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. There are 1 channels on this power managment ic that can be found in a series. In this IC management you will find SC-74A, SOT-753 functions for you to refer to. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. In a 2.4V supply voltage, the power management conducts. Power ics operate at 1 supply voltages. By Surface Mount, IC management has been mounted. There is a subcategory of this power ic known as Power Management Circuits. In total, the power management has 5 pins in it. Pin count of the power management is 5. There should be a minimum voltage supply (Vsup) of 700mV for this PMIC. This IC power should be powered by no more than 7V volts of supply voltage (Vsup). Surface Mount mounting is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~125°C TA. The output voltage of this power managment ic during operation is Open Drain or Open Collector. It is always advisable to use BU42*, the base supervisor number, when searching for similar PMICs from the manufacturer. Voltage supervisor can work with a supply temperature of 1.75μA at the most.

BU4214G-TR Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV

BU4214G-TR Applications

There are a lot of ROHM Semiconductor BU4214G-TR Voltage Supervisors applications.

• Electronics installed in the vehicle
• Transformer load monitoring equipment
• Consumer electronics
• Network equipment
• Detection of phase imbalance
• Magnetic resonance imaging
• Power communication system
• Microcontroller system
• Insulation fault location system
• Data storage applications