BU4215G-TR Overview

A total of 5 terminals are used to mount this power management. Tape & Reel (TR)-packaging is used. Power management is possible to find a series of 1 functions. There are 1 channels on this power managment ic that can be found in a series. IC management is packaged as a SC-74A, SOT-753 package. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. In a 2.4V supply voltage, the power management conducts. When 1 is applied to the power ic, it conducts. Surface Mount is the one that mounts power management. The power management belongs to the Power Management Circuits subcategory. A total of 5 pins are located on this power management. This power management system has 5 pins. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 700mV volts. The supply voltage (Vsup) should not exceed 7V volts in this IC power. The mounting type of the supervisors is Surface MountThis range of temperature should be set for the supervisors: -40°C~125°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. To find similar IC managements from the manufacturer, you can always search by BU42*. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 1.75μA.

BU4215G-TR Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV

BU4215G-TR Applications

There are a lot of ROHM Semiconductor BU4215G-TR Voltage Supervisors applications.

• Digitally controlled LDO regulators circuit
• Set top box
• Military communications
• Power communication system
• Detection of phase loss
• Military electronics
• Refrigeration
• Leakage current detection
• Insulation fault location system
• WiFi router