BU4217G-TR Overview

There are 5 terminals connected to this power management, which makes it easy to mount. Power management is packaged in a Tape & Reel (TR) way. There are 1 functions included in this PMIC so that you can refer to them. This power managment ic consists of 1 channels, each of which can be used independently. In this IC management you will find SC-74A, SOT-753 functions for you to refer to. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. During operation, the power ic is supplied with a voltage of 2.4V. Power ics operate at 1 supply voltages. Surface Mount is the one that mounts power management. There is a subcategory of this power ic known as Power Management Circuits. It has a total of 5 pins that are attached to IC management. 5 pins are on the supervisor. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 900mV volts. In this PMIC, the maximum supply voltage (Vsup) should not exceed 7V volts. Power management recommends the Surface Mount mounting type. We recommend setting the supervisors to -40°C~125°C TA degrees. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. As far as the supply current of the power management is concerned, it is 550nA. For similar manage ics search of the manufacturer, you can always refer to BU42*, the base PMIC number. Voltage supervisor can work with a supply temperature of 1.75μA at the most.

BU4217G-TR Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 900mV
550nA operating supply current

BU4217G-TR Applications

There are a lot of ROHM Semiconductor BU4217G-TR Voltage Supervisors applications.

• Insulation fault location system
• Satellite navigation
• emergency room
• Detection of phase imbalance
• DVR
• Efficient information transmission
• Smartphones
• Display equipment
• Leakage current detection
• Refrigeration