BU4229G-TR Overview

This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. Power management is packaged in a Tape & Reel (TR) way. Power management is possible to find a series of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. In this IC management you will find SC-74A, SOT-753 functions for you to refer to. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. There is a voltage supply of 2.4V for the PMIC chip, and the chip conducts at that voltage. A supply voltage of 1 is used to conduct the PMIC chip. Surface Mount mounts IC management. Power Management Circuits is a subcategory of this PMIC chip. In total, IC powers are 5 pins on the board. There are 5 pins on the power managment ic. There should be a minimum voltage supply (Vsup) of 700mV for this PMIC. The maximum supply voltage (Vsup) is not to exceed 7V volts in this IC management. In this case, Surface Mount is the recommended mounting type. You should set the supervisor's temperature during -40°C~125°C TA . While in operation, this supervisor has a voltage output of Open Drain or Open Collector. For this power management, there is an 550nA volt supply current. A similar IC managements number of the manufacturer can always be found by using BU42*, the base power ics number. The maximum supply temperature is 1.75μA.

BU4229G-TR Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
550nA operating supply current

BU4229G-TR Applications

There are a lot of ROHM Semiconductor BU4229G-TR Voltage Supervisors applications.

• Stable power system
• Leakage current detection
• Radar
• DSP
• Functional modules
• Power distribution systems of CCU
• Leakage protection
• DVR
• Urban rail transit weak current power monitoring
• Cloud computing