BU4232G-TR Overview

It is mounted through 5 terminals on the power management. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. Please refer to this PMIC for 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. Please refer to power management for SC-74A, SOT-753 functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. The supervisor is always powered by a 2.4V volt supply. During operation, the power ic is supplied with a voltage of 1. The power management is mounted by a Surface Mount-axis. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, it has 5 pins on IC management. This power management system has 5 pins. IC management can only work with a supply voltage of 700mV volts. There should be no more than 7V volts of maximum supply voltage (Vsup) in this power management. Surface Mount mounting is recommended. You should set the supervisor's temperature during -40°C~125°C TA . There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. A similar IC managements number of the manufacturer can always be found by using BU42*, the base power ics number. The maximum supply temperature that PMIC chip can work with is 1.75μA.

BU4232G-TR Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV

BU4232G-TR Applications

There are a lot of ROHM Semiconductor BU4232G-TR Voltage Supervisors applications.

• Data storage applications
• Leakage current detection
• Satellite navigation
• Radar
• Military electronics
• Fire equipment power monitoring system
• Analog circuit
• Digitally controlled LDO regulators circuit
• FPGA design
• Magnetic resonance imaging