BU4235FVE-TR Overview

This power management consists of 5 mounting terminals on which it can be mounted. Packaging is in the form of a Tape & Reel (TR). Please refer to this PMIC for 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. As a reference, this IC power includes SOT-665 functions for your convenience. There are a number of benefits that this PMIC has in common with other Simple Reset/Power-On Reset manage ics. IC management conducts in a 2.4V-voltage supply. Power management conducts at a voltage of 1. By Surface Mount, IC management has been mounted. Power Management Circuits is a subcategory of this PMIC chip. In total, it has 5 pins on IC management. 5 pins make up the power management. IC management can only work with a supply voltage of 700mV volts. There should be no more than 7V volts of supply voltage (Vsup) in this power management. The mounting type of the supervisors is Surface MountWe recommend setting the supervisors to -40°C~125°C TA degrees. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. A similar IC managements number of the manufacturer can always be found by using BU42*, the base power ics number. The maximum supply temperature is 1.75μA.

BU4235FVE-TR Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV

BU4235FVE-TR Applications

There are a lot of ROHM Semiconductor BU4235FVE-TR Voltage Supervisors applications.

• Important electronics for automotive safety
• Leakage current detection
• Efficient information transmission
• Automotive permanent magnet synchronous motors
• Microprocessor system
• Battery cars
• Embedded computing
• Medical-specific insulation monitor
• Radio
• Magnetic resonance imaging