BU4238G-TR Overview

This power management consists of 5 mounting terminals on which it can be mounted. Packaging is in the form of a Tape & Reel (TR). In this IC power you will find 1 functions for you to refer to. Power management consists of 1 channels, each of which can be used independently. Please find attached SC-74A, SOT-753 functions for your reference in this IC power. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. During operation, the power ic is supplied with a voltage of 2.4V. IC management is possible to find a succession of 1 voltages that have been checked. Surface Mount is the one that mounts power management. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. 5 pins are present in total in this power management. Pin count of the power management is 5. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 700mV, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) is not to exceed 7V volts in this IC management. Power management' mounting is recommended to be done with the Surface Mount type of mounting. This range of temperature should be set for the supervisors: -40°C~125°C TA. As this power managment ic operates, it is able to produce an output voltage of Open Drain or Open Collector. It is always advisable to use BU42*, the base supervisor number, when searching for similar PMICs from the manufacturer. At most, voltage supervisor can operate at a supply temperature of 1.75μA.

BU4238G-TR Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV

BU4238G-TR Applications

There are a lot of ROHM Semiconductor BU4238G-TR Voltage Supervisors applications.

• DC stabilized power supply module
• Satellite navigation
• Medical-specific isolation transformer
• Telecommunications equipment
• Power distribution systems of infant care room
• Set top box
• Power distribution systems of ICU
• Smart meter
• Precision measurement
• Dash board