BU4240G-TR Overview

This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. It is packaged with Tape & Reel (TR). Please find attached 1 functions for your reference in this IC power. A series of 1 channels can be found on this supervisor. Please find attached SC-74A, SOT-753 functions for your reference in this IC power. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. The supervisor is always powered by a 2.4V volt supply. When 1 is applied to the power ic, it conducts. Surface Mount mounts power management on the wall. This power ic can be sub-categorized as Power Management Circuits. In total, IC powers are 5 pins on the board. The pins of the power management system count 5. IC management can only work with a supply voltage of 700mV volts. In this PMIC, the maximum supply voltage (Vsup) should not exceed 7V volts. The recommended mounting type for IC management is Surface Mount. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. If you want to search for similar IC managements of this manufacturer, you can always refer to BU42*, which is the base power ics number. The maximum supply temperature that PMIC chip can work with is 1.75μA.

BU4240G-TR Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV

BU4240G-TR Applications

There are a lot of ROHM Semiconductor BU4240G-TR Voltage Supervisors applications.

• Battery cars
• Personal computers
• Electronics installed in the vehicle
• Low voltage/high power - AI, GPU
• Insulation fault location system
• Microcontroller system
• Analog circuit
• Satellite navigation
• DVR
• Unattended substation automation