BU4243F-TR Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 4 in total. This power ic is packaged in a way that looks like a Tape & Reel (TR). As a reference, this IC management includes 1 functions for your convenience. There are a total of 1 channels on this supervisor, and they are arranged in a series. In this IC management you will find SC-82 functions for you to refer to. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. When a supply voltage of 2.4V is applied to the power ic, it conducts. IC management conducts in a 1-voltage supply. By Surface Mount, IC management has been mounted. This power ic can be sub-categorized as Power Management Circuits. A total of 4 pins are located on this power management. 4 pins make up the power management. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 700mV, which is the minimum supply voltage that should be applied. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 7V volts. In this case, Surface Mount is the recommended mounting type. We recommend setting the supervisors to -40°C~125°C TA degrees. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. For similar manage ics search of the manufacturer, you can always refer to BU42*, the base PMIC number. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 1.75μA.

BU4243F-TR Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV

BU4243F-TR Applications

There are a lot of ROHM Semiconductor BU4243F-TR Voltage Supervisors applications.

• Satellite navigation
• FPGA design
• Electronics installed in the vehicle
• Detection of phase sequence
• Solar power charger
• Stable power system
• Digitally controlled LDO regulators circuit
• Set top box
• Military communications
• Medical-specific isolation transformer