BU4314FVE-TR Overview

This power management consists of 5 mounting terminals on which it can be mounted. Packaging is in the form of a Tape & Reel (TR). To assist you, this IC power includes 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. In this IC management you will find SOT-665 functions for you to refer to. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. The supervisor is always powered by a 2.4V volt supply. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Surface Mount mounts IC management. There is a subcategory of this power ic known as Power Management Circuits. The total number of pins on this power management is 5. There are 5 pins on the supervisor. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 700mV. This IC power should be powered by no more than 7V volts of supply voltage (Vsup). Surface Mount is the recommended mounting type. You should set the supervisor's temperature during -40°C~125°C TA . While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. If you want to search for similar IC managements of this manufacturer, you can always refer to BU43*, which is the base power ics number. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 1.75μA.

BU4314FVE-TR Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV

BU4314FVE-TR Applications

There are a lot of ROHM Semiconductor BU4314FVE-TR Voltage Supervisors applications.

• DSP
• Leakage current detection
• Electronics installed in the vehicle
• Efficient information transmission
• Radar
• Detection of phase imbalance
• Automotive permanent magnet synchronous motors
• Fire equipment power monitoring system
• Power distribution systems of operating room
• Smart meter