BU4315G-TR Overview

There are 5 terminals connected to this power management, which makes it easy to mount. Power management is packaged in a Tape & Reel (TR) way. Please refer to this PMIC for 1 functions. This power management is made up of 1 channels which are available in a series format. The purpose of this IC power is to provide you with a reference of SC-74A, SOT-753 functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. There is a voltage supply of 2.4V for the PMIC chip, and the chip conducts at that voltage. When a supply voltage of 1 is applied to the power ic, it conducts. Surface Mount mounts power management on the wall. A IC power such as this can be classified as a Power Management Circuits power management system. There are a total of 5 pins on power management. There are 5 pins on the power managment ic. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 700mV. The maximum supply voltage (Vsup) is not to exceed 7V volts in this IC management. The recommended mounting type is Surface Mount. We recommend setting the supervisors to -40°C~125°C TA degrees. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. If you want to search for similar IC managements of this manufacturer, you can always refer to BU43*, which is the base power ics number. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 1.75μA.

BU4315G-TR Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV

BU4315G-TR Applications

There are a lot of ROHM Semiconductor BU4315G-TR Voltage Supervisors applications.

• Sensitive sensors
• Insulation fault location system
• Leakage protection
• Radio
• Consumer electronics
• Satellite navigation
• Functional modules
• Detection of phase sequence
• Household appliances
• Battery-powered equipment