BU4320FVE-TR Overview

There are 5 terminals on this power management that allow it to be mounted. Tape & Reel (TR)-packaging is used. As a reference, this IC management includes 1 functions for your convenience. There are a total of 1 channels on this supervisor, and they are arranged in a series. Please find attached SOT-665 functions for your reference in this IC power. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. When a supply voltage of 2.4V is applied to the power ic, it conducts. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The mount is provided by Surface Mount. As a subcategory, this PMIC chip can be categorized as Power Management Circuits. The total number of pins on this power management is 5. 5 pins make up the power management. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 700mV. There should be no more than 7V volts of maximum supply voltage (Vsup) in this power management. The recommended mounting type for IC management is Surface Mount. The temperature of the supervisors should be set to this range: -40°C~125°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. It is always advisable to use BU43*, the base supervisor number, when searching for similar PMICs from the manufacturer. The maximum supply temperature that PMIC chip can work with is 1.75μA.

BU4320FVE-TR Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV

BU4320FVE-TR Applications

There are a lot of ROHM Semiconductor BU4320FVE-TR Voltage Supervisors applications.

• Satellite navigation
• Display equipment
• Battery cars
• Unattended substation automation
• Electronics installed in the vehicle
• Data storage applications
• Urban rail transit weak current power monitoring
• Microcontroller system
• Digitally controlled LDO regulators circuit
• Consumer electronics