BU4336F-TR Overview

There are 4 terminals on this power management that allow it to be mounted. It is packaged with Tape & Reel (TR). To assist you, this IC power includes 1 functions. A series of 1 channels can be found on this supervisor. In this PMIC, you can find SC-82 functions for your reference. There are a lot of similarities between this IC management and other Simple Reset/Power-On Reset products. A supply voltage of 2.4V is used to conduct the PMIC chip. When 1 is applied to the power ic, it conducts. Surface Mount is the one that mounts power management. It is possible to subcategorize this power ic as a Power Management Circuits chip. The total number of pins on this power management is 4. There are 4 pins on the power managment ic. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 700mV, which is the minimum supply voltage that should be applied. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 7V volts. Surface Mount mounting is recommended. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. It is always advisable to use BU43*, the base supervisor number, when searching for similar PMICs from the manufacturer. If you want to work with PMIC chip, you will need to supply PMIC chip with a temperature at least of 1.75μA.

BU4336F-TR Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV

BU4336F-TR Applications

There are a lot of ROHM Semiconductor BU4336F-TR Voltage Supervisors applications.

• Military electronics
• Detection of phase imbalance
• Radio
• Personal computers
• Fire equipment power monitoring system
• Computer applications
• Low voltage/high power - AI, GPU
• Medical-specific insulation monitor
• Electronics installed in the vehicle
• Utility meter