BU4346G-TR Overview

Power management is mounted through 5 terminals. Tape & Reel (TR)-packaging is used. The purpose of this IC management is to provide you with a reference of 1 functions. Depending on the power managment ic you are looking at, you can find a total of 1 channels. To assist you, this PMIC includes SC-74A, SOT-753 functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. When 2.4V is applied to the power ic, it conducts. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The power management is mounted by Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. It has a total of 5 pins that are attached to IC management. Pin count of the power management is 5. In order for this PMIC to work correctly, the minimum supply voltage (Vsup) should be greater than 700mV. During this IC power, the maximum supply voltage (Vsup) should not exceed 7V volts. Surface Mount is the recommended mounting type. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. A maximum supply temperature of 1.75μA can be used with this power management.

BU4346G-TR Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV

BU4346G-TR Applications

There are a lot of ROHM Semiconductor BU4346G-TR Voltage Supervisors applications.

• Detection of phase imbalance
• Detection of phase sequence
• WiFi router
• Embedded computing
• Solar power charger
• Satellite navigation
• Rechargeable batteries
• Display equipment
• Dash board
• Battery-powered equipment