BU4809FVE-TR Overview

A total of 5 terminals are used to mount this power management. It is packaged with Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. It is possible to find on this power management a series of 1 channels. Please find attached SOT-665 functions for your reference in this IC power. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. When 2.4V is applied to the power ic, it conducts. Power management conducts at a voltage of 1. The mount is provided by Surface Mount. The power management belongs to the Power Management Circuits subcategory. The total number of pins on this power management is 5. There are 5 pins on the power managment ic. It is recommended that Vsup should not be less than 700mV for this IC power. Voltage (Vsup) shouldn't exceed 7V volts in this PMIC. The mounting type of the supervisors is Surface MountYou should set the supervisor's temperature during -40°C~125°C TA . Power management has an output of Open Drain or Open Collector during operation. There is a supply current of 550nA for the power management. A similar IC managements number of the manufacturer can always be found by using BU4809, the base power ics number. At the most, voltage supervisor can work with a supply temperature of 880nA.

BU4809FVE-TR Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
550nA operating supply current

BU4809FVE-TR Applications

There are a lot of ROHM Semiconductor BU4809FVE-TR Voltage Supervisors applications.

• Detection of phase imbalance
• Unattended substation automation
• Power distribution systems of infant care room
• Power distribution systems of ICU
• Magnetic resonance imaging
• Electrical fire monitoring system
• Consumer electronics
• Efficient information transmission
• Military communications
• Sensitive sensors