BU4825FVE-TR Overview

There are 5 terminals on this power management that allow it to be mounted. It is packaged with Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. There are 1 channels on this power managment ic that can be found in a series. Please refer to power management for SOT-665 functions. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. A supply voltage of 2.4V is used to conduct the PMIC chip. Power management conducts at a voltage of 1. The mount is attached to Surface Mount. The power management belongs to the Power Management Circuits subcategory. In total, IC powers are 5 pins on the board. There are 5 pins on the power managment ic. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 700mV. In this PMIC, the maximum supply voltage (Vsup) should not exceed 7V volts. Power management recommends the Surface Mount mounting type. This power management is the recommended temperature range for the supervisors: -40°C~125°C TA. Power management has an output of Open Drain or Open Collector during operation. There is a supply current of 550nA for the power management. It is always advisable to use BU48*, the base supervisor number, when searching for similar PMICs from the manufacturer. A maximum supply temperature of 1.23μA can be used.

BU4825FVE-TR Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
550nA operating supply current

BU4825FVE-TR Applications

There are a lot of ROHM Semiconductor BU4825FVE-TR Voltage Supervisors applications.

• Medical-specific insulation monitor
• Power distribution systems of CCU
• Automotive permanent magnet synchronous motors
• Battery cars
• Data storage applications
• Important electronics for automotive safety
• Leakage protection
• DVR
• Stable power system
• Cloud computing