BU4923G-TR Overview

This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. Packaged in a Tape & Reel (TR)-shape, IC management comes with a number of features. Please refer to this PMIC for 1 functions. This power management is made up of 1 channels which are available in a series format. In this PMIC, you can find SC-74A, SOT-753 functions for your reference. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. The supervisor is always powered by a 2.4V volt supply. When 1 is applied to the power ic, it conducts. The mount is provided by Surface Mount. This power ic can be sub-categorized as Power Management Circuits. It has a total of 5 pins that are attached to IC management. This power management has 5 pins. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 900mV, which is the minimum supply voltage that should be applied. In this PMIC, the maximum supply voltage (Vsup) should not exceed 7V volts. The recommended mounting type is Surface Mount. The supervisors should be set to the following temperature: -40°C~125°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 550nA. If you want to search for similar IC managements of this manufacturer, you can always refer to BU4923, which is the base power ics number. At most, voltage supervisor can operate at a supply temperature of 1.23μA.

BU4923G-TR Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 900mV
550nA operating supply current

BU4923G-TR Applications

There are a lot of ROHM Semiconductor BU4923G-TR Voltage Supervisors applications.

• Sensitive sensors
• Power distribution systems of operating room
• emergency room
• Power distribution systems of infant care room
• Detection of phase loss
• Stable power system
• Military communications
• WiFi router
• Satellite navigation
• Battery-powered equipment