BU4924F-TR Overview

As you can see, this power management is mounted through 4 terminals. It is packaged with Tape & Reel (TR). Please refer to this PMIC for 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of SC-82 functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. In a 2.4V supply voltage, the power management conducts. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. The mount is attached to Surface Mount. This power ic can be sub-categorized as Power Management Circuits. It has a total of 4 pins that are attached to IC management. There are 4 pins on the supervisor. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 700mV, which is the minimum supply voltage that should be applied. The supply voltage (Vsup) should not exceed 7V volts in this IC power. Surface Mount mounting is recommended. This range of temperature should be set for the supervisors: -40°C~125°C TA. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 550nA. A similar IC managements number of the manufacturer can always be found by using BU4924, the base power ics number. There is a requirement for 2.5/5V power to power this power management. A maximum supply temperature of 1.23μA can be used with this power management.

BU4924F-TR Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
550nA operating supply current

BU4924F-TR Applications

There are a lot of ROHM Semiconductor BU4924F-TR Voltage Supervisors applications.

• Network equipment
• Fire equipment power monitoring system
• WiFi router
• Power distribution systems of ICU
• Radio
• Power distribution systems of CCU
• External alarm
• Microprocessor system
• Detection of phase imbalance
• Leakage protection