BU4947G-TR Overview

Power management is mounted through 5 terminals. There is a Tape & Reel (TR)-packaging method applied to IC management. There are 1 functions included in this PMIC so that you can refer to them. It is possible to find on this power management a series of 1 channels. In this PMIC, you can find SC-74A, SOT-753 functions for your reference. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. Manage ics operate at 2.4V supply voltages. When a supply voltage of 1 is applied to the power ic, it conducts. The mount is attached to Surface Mount. It is possible to subcategorize this power ic as a Power Management Circuits chip. The total number of pins on this power management is 5. 5 pins are present on the power management system. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 700mV volts. The maximum supply voltage (Vsup) is not to exceed 7V volts in this IC management. Power management' mounting is recommended to be done with the Surface Mount type of mounting. This power management is the recommended temperature range for the supervisors: -40°C~125°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. The supervisor's supply current is specified to 550nA. A similar IC managements number of the manufacturer can always be found by using BU4947, the base power ics number. The maximum supply temperature that PMIC chip can work with is 1.75μA.

BU4947G-TR Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
550nA operating supply current

BU4947G-TR Applications

There are a lot of ROHM Semiconductor BU4947G-TR Voltage Supervisors applications.

• Dash board
• DC stabilized power supply module
• FPGA design
• Battery cars
• Power distribution systems of CCU
• Radio
• Efficient information transmission
• Computer applications
• Utility meter
• Power distribution systems of ICU