SLA7051M Overview

This package is designed to work with [0].This part is packaged with a case of [0].Mounting the part by Through Holeis recommended.As a result, it is appropriate for the component connected to Printer.The device is capable of supplying a voltage of 3V~5.5V volts.A range of -20°C~150°C TJis available for operating temperature.Motors can be classified as Brushed DC.The part has 18terminations available.Voltage can be applied at a rate of 10V~44V volts to the load.The amplifier should be set to 5V.In terms of mounting, it is recommended that it be mounted in Through Hole.The output current should remain at 2A.There is an analog integrated circuit STEPPER MOTOR CONTROLLERpresent in the device.18 pins are provided for its design.In this case, -is maintained as the output voltage.As it has an output current of [0], it provides maximum flexibility in design.Drivers controllers also has a characteristic of [0].A maximum operating temperature of 150 °Cis reached.There should be a temperature higher than -20 °Cduring operation.

SLA7051M Features

Applications : Printer
Load voltage across the chip 10V~44V
Additional Feature: ALSO REQUIRES 10V TO 44V SUPPLY

SLA7051M Applications

There are a lot of Sanken
SLA7051M motor drivers applications.

• Smart lighting applications
• Automotive applications
• Dome
• Dash
• Footwell lighting
• Indicator
• Telltale lights
• Infotainment backlighting
• Tail lights
• Turn signals