SMA6864MZ LF2452 Overview

In order to package H bridge, Tube is used.H bridge is included in the 24-SSIP Formed Leads package as a cost-saving measure.Based on the supply voltage of 20V, improved reliabilbridge drivery can be ensured.H bridge circuit is put into place in the way of Through Hole.Motor driver H bridge is possible for -20°C~150°C TJ to operate normally at motor driver H bridges operating temperature.There are lots of uses for H bridge motor driver, including AC Motors.On the PCB H gate is mounted using Through Hole.To terminate a transmission line with the H bridge whose characteristic impedance matches the line, 24 terminations are employed.To operate H bridge circuit, a voltage supply of 15V is required.H bridge circuit contains an analog IC type AC MOTOR CONTROLLER.The H-bridge is an electronic H-bridge of the - series.A maximum current is reached by output when H-bridge reaches 3.75A.The power supply pins and the output pins are conducting a current of 2.5 A.Also, H-bridge is capable of providing ALSO REQUIRED VBB SUPPLY MAX 200V.So as to avoid excessive costs, 150 °C is considered to be the maximum reasonable operating temperature.Considering the cost implications, the acceptable minimum operating temperature is -20 °C.

SMA6864MZ LF2452 Features

Available in 24-SSIP Formed Leads Package / Case
Operating Temperature at the range of Through Hole
Subcategory: 3.75A
With ALSO REQUIRED VBB SUPPLY MAX 200V Drivers
Operate supply voltage at -20 °C

SMA6864MZ LF2452 Applications

There are a lot of Sanken
SMA6864MZ LF2452 Full Bridge Drivers, Half-Bridge Drivers applications.

• Desktop Computers
• V-Core
• Non-V-Core
• Workstations
• High-Current DC-DC Point-of-Load Converters
• Networking Microprocessor Voltage Regulators
• Telecom Microprocessor
• Voltage Regulators
• Small Form-Factor Voltage Regulator Modules
• Notebook Computers