SC1103CSTRT Overview

The switching controller fits in the 8-SOIC (0.154, 3.90mm Width) package and is ideal for most applications. There is sufficient capacity to generate switching controller for outputs 1. A solid enclosure of Tape & Reel (TR) surrounds pmic. A total of Transistor Driver dc switching's outputs can be handled by it. DC control operates at 3.8V~12V volts and has 3.8V~12V supply voltage. A 0°C~70°C TA dc switcher is not a problem. It is suitable for general dc dc regulator when it is set to Surface Mount. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. There are a DUAL terminal on the switching converters. There are many different types of terminations for 8. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 12V. Other relevant dc to dc converter ics will be returned if you search "SC1103". 8 pins are present on switching converter. There is a particular type of Switching Regulator or Controllers in switching converter. The test statistics indicate that DC regulator outputs a voltage of 2.5V. If you are starting a new project, you should note the dc dc regulator's typical output current is 500mA. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 95 %. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. Switching controller operates at 200kHz Hz. A nominal working status is achieved when the input voltage is set to 12V.

SC1103CSTRT Features

Transistor Driver Outputs
PULSE WIDTH MODULATION
Max Duty Cycle: 95 %
Frequency: 200kHz

SC1103CSTRT Applications

There are a lot of Semtech Corporation SC1103CSTRT DC to DC converter applications.

• Sink circuits
• Milling machines
• Arc suppression circuits
• Communication system
• Medical equipment
• Serial communication converter
• Handheld GPS
• Industrial controllers
• Gear/thread machining machines
• Correction machines